Semi automatic 4 heads glass jar bottle vacuum capping machine food paste jam sauce bottle twist off cap tightening machine lug cap rotary vacuum sealer

Semi automatic 4 heads glass jar bottle vacuum capping machine food paste jam sauce bottle twist off cap tightening machine lug cap rotary vacuum sealer

Semi automatic 4 heads glass jar bottle vacuum capping machine food paste jam sauce bottle twist off cap tightening machine lug cap rotary vacuum sealerModel:GR-30BPower supply:220V 50HZ /380V 50HZ&nb

  • Product Name: Semi automatic 4 heads glass jar bottle vacuum capping machine food paste jam sauce bottle
  • Brand: GeRong
  • Model: GR-30B
  • Machine Type: Capping Machinery
  • Packaging Type: Bottle jar
  • Dimension: 750L×740W×1480H mm

Semi automatic 4 heads glass jar bottle vacuum capping machine food paste jam sauce bottle twist off cap tightening machine lug cap rotary vacuum sealer

Model:GR-30B

Power supply:220V 50HZ /380V 50HZ 

Power: ≤1.3KW(include vacuum pump)

Production capacity: 1200-1500bph

Cap Diameter:30-80mm 80-150mm

Bottle height:50-180mm 120-250mm

Bottle diameter: 30-80mm; 80-150mm

Air supply:0.4-0.8Mpa

Air consumption:0.3m3/min

Bottles range Dia:30-80mm 80-150mm

Vacuum:-0.08Mpa

Standard export package size:750L×740W×1480H mm

Machine Weight:120KG

Semi automatic vacuum capping machine adopts vacuum pump vacuum method,screw cap torsion and vacuum degree can be set of demand,unique design make it compatible with a variety of different shape,size of the bottle cap unscrewing,strong compatibility,and easy to adjust .Widely used in food,canned,beverage,condiment ,health care products and other industries in the three (four) spin tinplate cover glass vacuum screw cap.

image.png

image.png

image.png

Machine pictures:

image.png

image.png

image.png

image.png

image.png

image.png

3. Operation Method (refer to Fig. 1) 

3.1 Preparation before installation and adjustment

3.1.1 Prepare a nylon locating head for cap sealing subject to the size of cap (you may refer to the nylon locating head on the main machine. Change its inside diameter subject to the size of cap. For example, the inside diameter of nylon locating head shall be Ø16.1~Ø16.2 and chamfering 1×45° for cap Ø16.) as well as a capping for worktable (process the bore according to the diameter of bottle body).

3.1.2 Loosen the forcing screw (33), turn the hand wheel. Adjust the height of machine nose according to the bottle height. Keep the locating head (48)10 - 20mm higher than the bottle. Hold the bottle at the center of worktable and locating head and then tighten the forcing screw (33).

3.2 Adjustment of sealing cap

3.2.1 Loosen both regulating screw (11) and forcing screw (09). Remove the regulating lever of pressure wheel to keep it open to maximum extent. Place the bottle at the center of worktable. Press down the handle grip to lowest level. Remove the regulating lever of pressure wheel to keep the pressure wheel close to the cap. Adjust the height of locating head (48) to keep the top side of pressure wheel against lower part of cap according to pressing height of pressure wheel (46).

3.2.2 Press down the handle grip to lowest level. Remove the regulating lever of pressure to lower part of cap and then tighten the forcing screw.

3.2.3 Replace with a bottle with a complete cap and keep it at the center of worktable. Turn on the work switch for trial sealing. Tighten all the regulating screws in case of successful trial operation. Then start normal sealing.

4. Maintenance

4.1 Connect the machine with earth line to prevent from electric leakage.

4.2 Open the guide cover (29) and add appropriate amount of machine oil on sliding part and turning part of pressure wheel every week.

4.3 Lock all the nuts and screws and recover the guide cover before work.

image.png

Machine main structure:

image.png

image.png

5 Troubleshooting (refer to Fig. 1 and 2)

Failure

Cause

Solution

The failure of motor after switching on

Failure of power supply

Connect with power supply

Burnout of bridge rectifier

Replace with a new rectifier

Damaged switch

Replace with a new switch

The bottle is pressed broken

Damaged travel switch

Replace with a new travel switch (19)

Too big force of pressure wheel

Reduce the force of regulating screw  (19)

Poor bottle

Replace with bottle of good quality

Unfirm capping

Less pressure of pressure wheel

Increase the pressure of regulating screw (19)

High locating head

Lower the locating head

Unstable capping

Distort cap

Replace with an eligible bottle

Insufficient amount of compression

Lower the machine nose and keep the roller on the cylinder face of arbor

image.png

image.png

Sample food jar bottles and finished caped bottles:

image.png

Wooden case packaging and shipment:

image.png

image.png

image.png