Medical Cover Hot Melt Glue Gluing Machine Insurance Cover Gluing Machine Fully Automatic Cover Gluing Machine Covering Machine
1. Length 4000 × width 700 (820) × height 750 (1100) mm.
2. Power supply: AC220V, 400W.
3. Conveying: The glue application speed is adjustable from 1.5m-15m (the conveying glue can be adjusted independently).
4. Gluing method: photoelectric sensor gluing, leaving 5 mm at the head and tail.
5. Control method: conventional control circuit.
6. Output count: 6-digit liquid crystal display, power-down retention function.
1. The main body of the conveyor line is processed by 40×60 and 40×40 aluminum alloy profiles.
2. Φ38, Φ80 galvanized rollers.
3. 2.0 Green Dutch conveyor belt 700×6000mm circumference.
4. The gluing bracket is 40×40 square pass processing.
5. Equipped with Φ70×700㎜PU traction rollers.
6. The front and back coating drives the photoelectric switch, and the control components are all Nissan components.
7. Chrome-plated working platform.
8. The conveying drive is a 90W gear reduction motor, equipped with a special speed governor.
9. Glue is equipped with Taiwan-produced 4/1HP gear frequency conversion speed motor.
10.26B host parametersTank capacity: 10kg
●Pump power: planetary gear 50K linked with variable frequency and adjustable speed for glue output
●Operating temperature: up to 210℃
● Overall power consumption: 5200W
●Power demand: 220VAC/single phase
●Glue melting capacity: 22kg/hr
●Body weight: 48kg
●Body size: 680x350x630mm
●Wind pressure range: gun body: 4.5kg
●Hose length: 2/4/6/8/10/24Ft
●Hose capacity: 2 groups/5 groups
●TANK Teflon is not carbonized
11. Hot melt hose:
★The inner tank adopts imported Teflon tube, which has good flexibility, anti-sticking property and high temperature resistance (up to 250 degrees), which can greatly reduce the carbonization phenomenon; ★The heater adopts American heating wire and high temperature resistance wire, Evenly wound on the outer wall of the throat, with good insulation, uniform heat conduction, and high temperature resistance: ★High-quality insulation materials are used to ensure the insulation performance of the throat.
★, Good bending performance, folding resistance, relying on high-quality materials (continuous folding heating wire and high temperature resistant wire), reasonable processing technology design, the maximum bending radius can reach 20cm.
★, length and other related parameters can be manufactured according to customer requirements
12. Scraper gun body
★, active air opening and yellow closing design, the reaction speed is sensitive and reliable.
★The built-in filter can reduce the malfunction caused by clogging the coating nozzle.
★The coating nozzle is made of imported wear-resistant materials and treated with special technology, which can be durable and will not be worn for long-term use.
★, reliable new sealing structure components, to ensure the stable operation of the gun body, long-lasting durability.
★, it can carry out medium-low or high-speed intermittent and continuous glue spraying, and can evenly coat the glue on the substrate. The glue coating effect of this gun is blocky.
★The coating width is 1mm-18mm, which can basically meet all current coating requirements.