Customized carton box sealing integrated with automatic PP strapping sealing machine carton boxes top bottom taping strapping sealer
Model:GR-FD50
Voltage/Power:380V 50Hz / 1.2kW
Packing Speed:6boxes/Min
PP width:9-16mm
Table Height:500-750mm can be adjust
Max Packing size:600*500*500mm
Min Packing size:200*150*150mm
Unpowered roller table:Size:1000*600*600mm Weight:25kg
Machine Size:1620*1420*1550(mm)
Machine weight:400Kg
Semi automatic adhesive tape top bottom carton box sealing machine
Model:GR-6050
Power Supply:AC110-220V/60-50Hz
Power:180W
Production speed:0-20ctns/min
Conveyor speed:20m/min
Adhesive tape type:BOPP, PVC adhesive tape
Sealing area:Up and down
Tape width:48-75mm
Packing length:≥150mm
Sealing width:180-500mm
Sealing height:100-600mm
Dimension:1600 X 740 X1450mm
Net weight:180kg
Automatic PP PET belt carton boxes strapping sealing machine
Model:GR-S201
Power Supply:AC 110/220V 50Hz/ 1 Phase
Stripping way:Sensor Detect or Turn on/off
Power Consumption:0.75kw
Strapping Speed:3-4 Strip per minute
Strapping Size:800*500mm
Strapping Tension:80kg
PP Tape Width:Thickness 0.6-1.2mm Width 9-15mm
Arch size:W80×H60cm or customized
Weight capacity:80KG
Tighten force:0-50KG or customized
Belt tray size:Width 160-180mm, Inner diameter 200-210mm, Outer diameter 400-500mm
Dimension:1400*620*1435MM
H.S Code:8422400000
Weight:220kg
1. The sealing machine is suitable for the sealing and packaging of carton. It can be used in stand-alone operation or in combination with the assembly line. It has a wide application range and is suitable for chemical fiber industry, tobacco re-baking industry, pharmaceutical industry, publishing industry, refrigeration and air conditioning. Industry, home appliance industry, ceramic industry, food industry, etc.
2. This type of sealing machine uses the adhesive tape to seal the carton, which is economical and easy to adjust. It can complete the upper and lower sealing actions at one time, and the printing tape can improve the product impression.
Machine detail parts:
Tape application:
Trouble shooting:
1. The sealing machine pinching action is too slow or the pinning stroke is insufficient: the bolt is loose, and the front buckle or the inner piece of the plate machine is worn. The bolt can be tightened at this point, paying attention to the correct position of the front buckle shaft. It is also possible to replace the front buckle or the inner plate of the trigger machine. After completing the above actions, test its function. If the stroke is too short, fine-tune the front buckle shaft upwards. If the motion is slow, fine-tune the front buckle shaft downwards;
2. Leakage at the piston rod: The bottom ring of the main body is damaged. The ring should be replaced at this time.
3. Exhaust air leakage: The switch valve ring or switch seat ring is damaged or the piston ring is damaged. Replace the ring.
4. Leakage at the trigger: The switch valve ring or the switch seat ring is damaged. Replace the ring.
5. The drive ring is loose and cannot be positioned: the steel strip and the drive spring are inelastic. Remove the combination of the trigger and reinstall the spring tip or replace the steel strip and drive spring
Machine in stock for shipment:
Wooden case packaging and shipment: