Automatic tablet single pressing machine GMP standard tablet pill making machine rotary type pharmaceutical candy tablet camphor production equipment
Max. Dia. of Tablet(mm):12mm
Max. Thickness of Tablet(mm):6mm
Max. Depth of Filling(mm):15mm
Max. Production Capacity(Pc/h):9000pcs/h12600pcs/h16200pcs/h
Dia. of Turret(mm):200mm
Rotary Speed of Turret(r/min):0～30r/min
Dia. of Center Form (mm):26mm
Height of Center Form (mm):22mm
Dia. of Upper/Lower Punching Bar (mm):22mm
Length of Upper/Lower Punching Bar (mm):115mm
Automatic tablet single pressing machine GMP standard tablet pill making machine is a series of products can be widely used in pharmaceutical, food and other industries to suppress a variety of round and shaped tablets, change series tablet press meet the pharmaceutical production and quality management of GMP standards, compression chamber and the transmission mechanism is completely separate, tabletting room without any paint, and drug contact parts are stainless steel or with special surface treatment, non-toxic and resistant to corrosion.
Rotary tablet press structure:
1 Turntable structure: Turntable is the main actuator for the work of this machine. There are main components such as upper and lower bearing components, main shaft and turntable. The main shaft is supported on the bearing, driven by the worm gear, splined, and the main shaft is driven to rotate the turret.
2 Track mechanism: The track has a cylindrical cam and a plane cam composed of an upper track and a lower track, which are the trajectories of the upper and lower punches. The upper track consists of multiple tracks such as the upper rushing upper rail, the upper rushing lower rail, the upper rushing upper parallel rail, the upper rushing lower parallel rail, and the lower rail. They are fastened to the upper track disc, respectively. The lower track consists of an undershoot upstream rail, a lower thrust lower rail, and a fill rail. They are mounted separately on the lower rail seat.
3 Filling adjustment device: Filling adjustment is used to adjust the weight of the tablet. The filling adjustment mechanism is arranged inside the main body, and a moon-shaped filling rail can be observed on the plane of the main body, which is controlled by the action of the spiral to rise or fall to control the filling amount, and when the rotating disc is adjusted, the clockwise filling amount is decreased, and vice versa. Increase.
4 piece thickness (pressure) adjustment device: Adjust the sheet thickness (pressure) by adjusting the lower pressure roller up and down. The lower pressing wheel is installed in the groove of the main body, and is sleeved on the eccentric shaft, and the outer end is connected to the hand wheel. When the external hand wheel is adjusted, the eccentric shaft drives the pressing wheel to rise and fall, that is, adjust the sheet thickness (pressure), thereby Controlling the thickness and hardness of the tablet, the upper and lower adjustment of the upper pressure roller can also be used as an adjustment device, but it is not adjusted under normal circumstances.
5 feeding device; the device is composed of a hopper, an adjusting screw, a feeder and the like. The feeder is a moon-shaped grid feeder that is mounted on a turntable. The gap between the feeder and the turntable face and the height of the hopper are adjusted according to the fluidity of the particles.
6 Transmission: The transmission part of the machine is composed of electric motor, synchronous pulley and worm gear reduction box, test wheel and so on. The motor is mounted on the motor base of the master plate. After the motor is started, the power is transmitted to the reduction worm gear pair through a pair of timing belts. The electric speed is adjusted by AC variable frequency stepless speed regulation. Open the sides or the back door to directly observe and touch the parts.
7 Cover part: The machine casing is fully enclosed and meets GMP requirements. The upper part has four windows surrounding the city for easy cleaning and maintenance. The lower part is closed with a stainless steel door, which is normally closed and closed only when the dies are repaired and installed. A console is installed on the front of the machine. The tableting chamber and the machine drive section are separated by a stainless steel enclosure to ensure that the tableting chamber is clean and protects the drive components from powder contamination and corrosion.
Series of Model
Max. Dia. of Tablet(mm)
Max. Thickness of Tablet(mm)
Max. Depth of Filling(mm)
Max. Production Capacity(Pc/h)
Dia. of Turret(mm)
Rotary Speed of Turret(r/min)
Dia. of Center Form (mm)
Height of Center Form (mm)
Dia. of Upper/Lower Punching Bar (mm)
Length of Upper/Lower Punching Bar (mm)
Pressing mold according different size of tablets pills:
Tablet pressing process:
Wooden case packaging and shipment: